Known Issues 17.1.0
Known Issues main page Barracuda Virtual Reactor 17.1.0 Issues fixed in this version: KI-45: Energy balance may be incorrect due to inconsistencies at Pressure BCs KI-48: Particle feed rate may…
Design Study for Bio-Oil Production from Biomass Using a Dual Fluidized-Bed Reactor
Virtual Reactor simulations were used to evaluate the re-design and reconfiguration of a dual-fluidized bed (DFB) gasification system into a recirculating pyrolysis reactor, by researchers at NREL, UCSD, and West Biofuels, LLC.
Custom EMMS Drag Model Multiplier Tables
Proper selection of the drag model can have a significant effect on the results from Barracuda Virtual Reactor simulations. As part of our continuing study of drag models, CPFD Software,…
Cement Plant Reduces Costs while Lowering Carbon Footprint
After installation the plant confirmed that CO emissions were reduce over 70%, with a 22% increase in non-fossil fuel substitution. Return on investment was less than 6 month payback.
Changing Transient Data Points on Restart
In an ideal world, you would never forget to define all of the output data needed for a simulation, during the project setup process. In the real world, however, it sometimes…
Simulation of entrained flow gasification reactor with Multi Phase Particle in Cell (MP-PIC) approach
This paper focuses on the simulation of an entrained flow gasification reactor in Barracuda Virtual Reactor
Numerical investigation on the flow behavior of a novel fluidization based particle thermal energy storage (FP-TES)
This paper introduces and investigates the Fluidization Based Particle Thermal Energy Storage (FP-TES) technology
Advanced regenerator: a countercurrent fluidized bed regenerator utilizing a pressure gradient for powder transport
In this paper, researchers use Barracuda Virtual Reactor to help develop advanced regenerator technology
Active Fluidized Bed Technology Used for Thermal Energy Storage
The present paper describes the basic idea behind the key technology and the design methodology of a test rig in semi-industrial scale. In addition the results of selected preliminary experimental and numerical investigations are presented and discussed.
Using GMV to Obtain Average Values for One Plane
When post-processing Barracuda VR simulation data, an average value of a variable in a particular plane may be needed. There are a couple of different ways to obtain the data…